Routine maintenance-after each operation
1. Rinse the hose and filter connected to the detergent to remove any detergent residue to help prevent corrosion.
2. Turn off the water supply system connected to the pressure washer.
3. Pull the trigger on the stem of the servo gun to release all the pressure in the hose.
4. Remove the rubber hose and high-pressure hose from the high-pressure washer.
5. Cut off the connecting wire of the spark plug to ensure that the engine will not start (applicable to engine models).


Electric type:
The electric pressure washer turns the power switch to the "on" and "off" positions four to five times, each for 1-3 seconds, to remove the water in the pump. This step will help protect the pump from damage.

Engine type:
Slowly pull the engine starter rope 5 times to remove the water in the pump. This step will help protect the pump from damage.
Regular maintenance---maintained every 2 months
1. Regularly removing fuel deposits from the fuel storage tank will prolong the service life and performance of the engine. Fuel deposits can cause damage to fuel pipes, fuel filters and carburetors.
2. Use a protective kit to protect your pressure washer when not in use. The protective suite of the pump is specially used to protect the high-pressure cleaner from corrosion, premature wear and freezing. And apply lubricant to the valve and sealing ring to prevent them from jamming.


Electric type:
1. Turn off the pressure washer.
2. Disconnect the high pressure hose and servo gun rod from the pump.
3. Connect the valve to the pump protection tank and open the valve.
4. Turn on the washing machine; suck all the substances in the tank into the pump.
5. Turn off the washer; the high-pressure washer can be stored directly.




Engine type:
1. Turn off the pressure washer.
2. Disconnect the high pressure hose and servo gun rod from the pump.
3. Connect the valve to the pump protection tank and open the valve.
4. Ignite the fire and pull the starter rope; suck all the substances in the tank into the pump.
5. The high-pressure cleaner can be stored directly.