Reasons for the low pressure of gasoline high-pressure cleaners
Posted by Admin | 17 Jan
Most of the current production enterprises use high-pressure cleaning equipment. If the equipment is used too much, some minor problems will inevitably occur. Pay attention to maintenance and maintenance when using the equipment in normal times. Many high-pressure cleaners have a warranty, but after the warranty expires, if there is a problem, you need to repair it yourself or find an after-sales solution. For example, failures caused by improper operation, aging of parts caused by untimely equipment maintenance, and quality problems of the equipment itself will cause failures. High-pressure cleaners are a new type of cleaning equipment, which are divided into many types, including chillers and hot water machines, as well as fuel machines and electric machines. Today we will take a look at the reasons for the low pressure of gasoline high-pressure cleaners and how to reduce equipment failures.
Reasons for reduced stress:
There are many kinds of failures of gasoline high-pressure cleaners. If the problem is relatively large, it should be solved by a professional after-sales service. We can solve the common minor problems by ourselves. One of the problems that high-pressure cleaners often encounter is that the pressure of the equipment becomes smaller. If there is no leakage of water and oil in the testing equipment, then the problem of water seal and oil seal can be ruled out. Then look at the high-pressure nozzle, because after the equipment has been used for a period of time, due to the high pressure of the nozzle, the mouth of the nozzle will become larger and larger, and once the nozzle hole becomes larger, the pressure will gradually decrease. One is to check the filter screen. If there are too many impurities on the filter screen, the water flow rate will be slow, and the pressure will also decrease. If there is a fault, it is necessary to check it one by one to see where it is blocked. After unblocking, it will be much better. Also focus on checking the pressure valve. If the valve is not sealed or the parts are damaged, the pressure will also decrease, and it must be replaced and repaired in time.
1. Gasoline high-pressure cleaner power failure: This is also a common failure in use. If the voltage is too low, it will affect the operation of the high-pressure pump. The output power of the pump body is not up to standard, the water flow will also decrease, and the pressure will be insufficient. , the cleaning effect will be much worse.
2. Lubricating oil aging of high-pressure pump: The lubricating oil of the high-pressure pump should be replaced in time. The lubricating oil will age after a long time. If the replacement is not timely, the core components of the equipment will be damaged. Maintenance and inspection must be done well.
3. Failure of equipment parts: If the water pipe is damaged, the nozzle is damaged or blocked, and the sealing device is not sealed, it will lead to insufficient water outlet pressure.