The working principle of high pressure water pump:

Its working principle is that a sealing part plus the forward and backward running mode of the piston part realizes the suction and discharge of water flow and ensures the pressure of the water spray; during work, the piston pump runs repeatedly through the piston, which can make the pump work. The volume period changes.

Features of high pressure water pump:

1. The pressure is very high, the water flow is large, the suction stroke is huge, the noise generated is relatively low, the self-priming function is relatively stable, and it can be quickly self-priming without adding water.

2. With a switch that automatically protects the pressure from being too high or overheating, the output pressure will automatically stop running when the output pressure reaches a certain range and the temperature is too high. It has two interfaces of soft connection and hard pipe, and the joint is also metal and not easy to break. Lose.

3. At the same time, it has the advantages of self-priming pump and chemical pump, and the materials used are also corrosion-resistant imported materials, which can resist acid, alkali and corrosion. The pump body and the motor are in a separated state and will not directly contact the liquid, and there are no other parts inside, so there is no need to worry about the wear of the parts.

4. It can run stably and idly, with long service life, fine workmanship, small size and easy installation and carrying.